Our Turbine Flow Meter has a flow sensor with a magnetic muti-bladed spinning rotor (impeller) mounted inside at right angles to the flow. The rotational speed of the impeller is proportional to the velocity of the fluid. The pulse generated is transmitted and converted into a volumetric measurement.
- Digital flow meter measuring flow rate from 0.05m³/hr to 500m³/hr
- Combined indicator / Totalizer / Batcher / Rate switch / Pulsar mode
- Dual sensor, dual line, single meter, for RO applications
- Remote or local reset
- Optional computer interface with RS485 or 4-20mA output
Our Turbine Flow Meter has a flow sensor with a magnetic muti-bladed spinning rotor (impeller) mounted inside at right angles to the flow. The rotational speed of the impeller is proportional to the velocity of the fluid. The pulse generated is transmitted and converted into a volumetric measurement.
FLOW COMPARITOR :The meter is supplied with two sensors for RO permeate and reject line. The meter displays both the flow rates and calculates percentage recovery.
RATE SWITCH MODE :The relay is programmed to get energized whenever actual flow falls below the set value. Display shows "LOW FLOW RATE". Ideal for flow interlock, chemical dosing.
PULSER :Meter can be configured to any metering /dosing pump. Chemical dosing can be done on-line proportional to flow.
Flow Sensor :Various types of sensors available from 1/4″ to 12″ line size with wide range of process connection as well as material of construction
- 1/4″ , 3/4″ , 1″ & 2″ Full bore
- 1 ½” to 12″Insertion type